Powder Pump (Pneumatic Operated Type)
WRS air operated powder pumps are commonly used for a wide range of powder applications, such as Flour, Silicon Dioxide, Plasticizer, Oxidizer, Acrylic resin, acridine, as long as the powder bulk density lower than 0.8g/cm³ and powder keep complete dry. The powder transferred in the fully seal space, eliminate the possible pollution to environment. Patented designed with no dead point, no block, low failure rate.
Aalii Pte Ltd is the authorized agent for WRS pumps in Singapore. WRS Powder pump, is classified under the air operated double diaphragm pump and is designed for efficiency and safety. Operators no longer have to transfer powder from totes to blending tanks which helps eliminate any clumping issues. These pumps can be used for a wide range of powders that are used in industrial manufacturing operations. The powder pump is portable and does not need to be pre-installed, making it easy to move from one location to another.
Powder Pump Features:
- Pump up to 3 m³/min allowing users to complete large volume pumping application.
- Fully sealed design to prevent environment pollution caused by leakage.
- Smart automated pump controller and safety features, minimized pump failure.
- Easy to install, and able to move around as a portable powder pump.
- Patented design to prevent powder being compressed into solids particles and highly improved powder pumping efficiency.
- Reduced costs thanks to faster and cleaner transfer of process powder.
- Can be used for mobile work – can be easily transported from one site to the next.
- Little air contamination thanks to direct transfer from the powder container into the system.
- Patented air induction system prevents powders from forming clumps.
- Good cost-effectiveness as more practical and less complicated than complex systems.
WARNING!
Pumping medium must have below condition:
- All powder must be completely dry.
- Powder bulk density lower than 0.8g/cm³ .
- Powder shall be less than 150 mesh.
- Transfer distance is relevant to the powder bulk density. The smaller the density, the longer it can pump. For example: Silicon Dioxide can be pump up to 45 meters where else flour can be only pump up to 12 meters.
Types of powder can be transfer by the powder pump
- Activated Carbon
- Acrylic Resins
- Aluminum Oxide
- Bentonite
- Calcium Carbonate
- Carbon Black
- Cereal Flours
- Clay Powder
- Corn Starch
- Diatomaceous Earth
- Dust
- Expanded Mica
- Fire Extinguishing Powder
- Fumed Silica
- Ground Limestone
- Kaolin
- Micro Dolomite Filter
- Paint Resins
- Pearlite
- Pesticides
- Pharmaceuticals
- Pigments
- Powder Coatings
- Powdered Plastics
- Powdered Rock
- Quartz Powder
- Salicylic Acid
- Silicones
- Sorbents
- Starch
- Talc
- Toners
And many more……..